Epson digital vibration sensors, supplied by AMCORIS, provide precise three-axis measurement of vibration velocity and displacement for condition monitoring and predictive maintenance in marine and offshore equipment.
M-A342VD10 Vibration Sensor
Using Epson’s proprietary QMEMS quartz-resonator technology, the sensors feature compact, low-power designs with digital outputs. They can be used to measure vibration conditions and patterns in onboard vessel and submersible equipment including motors and rotating machinery, supporting optimized operation and fault detection.
Digital Vibration Measurement
The M-A342VD10 and M-A542VR10 both offer a velocity measurement range of ±100 mm/s and a displacement range of ±200 mm. Velocity measurements cover frequencies from 10 to 1000 Hz, while displacement measurements cover 1 to 100 Hz.
Both sensors provide raw, RMS and peak-to-peak digital outputs. Their digital interfaces remove the need for analog signal conditioning and support integration into monitoring systems.
For deployment and integration, AMCORIS supports engineering teams with evaluation kits, consulting and system integration for condition-based maintenance and smart automation.
Compact & Rugged Sensor Options
The M-A342VD10 provides a compact vibration monitoring option, measuring 48 × 24 × 16 mm and featuring an SPI/UART interface. It operates across a temperature range of -30 to +85°C.
For applications requiring greater environmental protection, the M-A542VR10 incorporates an IP67-rated metallic housing for protection against dust and water. Measuring 60 × 60 × 30 mm, it features an RS-422 interface and operates across a temperature range of -30 to +70°C, providing a rugged option for marine and offshore equipment applications.
To learn more about Epson vibration sensors for marine and offshore condition monitoring, visit the AMCORIS website.
