Teledyne Marine offers submersible electrical connectors and related cable termination products for power, data, and signal transmission. The range includes different contact arrangements, materials, pressure ratings, and mating methods for subsea equipment, offshore energy systems, defense applications, and oceanographic instruments. Stocked parts and rapid response manufacturing support OEMs selecting connectors for underwater platforms.
The product range includes:
- 100 Series: DGO dry-mate connectors designed and tested to MIL-C-24231 for submersible interconnect applications.
- 107 Series: DGO metal shell dry-mate connectors for submerged applications involving differential pressure.
- 128 Series High Density Connectors: Compact DGO instrumentation connectors for submerged applications.
- AGM Marine Connectors: AG Geophysical connectors for high-shock environments, rated to 300 psi when fully and properly mated.
- AGMU Marine Connectors: AG Geophysical submersible connectors for high-shock applications.
- AGP Positive Connectors: AG Geophysical waterproof connectors available with 2, 4, 8, or 16 contacts.
- AGPU Positive Connectors: AG Geophysical sealed connectors for source firing systems in high-shock environments.
- AGS Energy Source: Sealed electrical interconnect for seismic source firing systems.
- Compact FACT Cable Termination: ODI subsea termination for four-conductor cables where installation space is limited.
- Field Assembled Cable Termination (FACT): ODI electrical cable termination system for subsea applications.
- Nautilus WM1.7-30 Electrical Connector: ODI wet-mate connector with 4, 7, or 12 circuits and current ratings of up to 30 A, depending on configuration and operating conditions.
- Nautilus WM1.7-60 Electrical Connector: ODI four-circuit wet-mate connector rated to 60 A per pin, with a 1.0/1.7(2.0) kVAC voltage class.
- Nautilus WM10-250 Electrical Connector: ODI wet-mate connector with a 6/10(12) kV voltage class and a 250 A operating current rating.
- Triton® API 16D Dry Mate Connector: Hand-mateable ODI connector with test ports for submersible systems requiring API 16D compliance.
- Glass Reinforced Epoxy (GRE) Connectors: Impulse bulkhead and cable connectors for submerged applications.
- IE55 Rubber Molded Metal Shell Connector: Impulse connector for underwater and shipboard applications.
- Metal Shell Connector Series: Impulse stainless steel or aluminum shell connectors for rugged marine applications.
- Impulse Mini Metal Shell Electrical Connector: Compact, high-density connector for instrumentation and underwater vehicles.
- Net Series 1 Gigabit Ethernet: Impulse subsea Ethernet connectors certified for 1 Gbit/s transmission and rated to 10,000 psi when mated.
- Rubber Molded GRE Connectors: Impulse molded inline and bulkhead connectors for submerged applications.
- Splash Mate Series: Impulse connectors with individually sealed contacts that permit mating at the surface while wet.
- Metal Key Titan Connector Series: Impulse watertight connectors designed for mating and unmating in wet or harsh environments.
- Wet Mate Series: Impulse underwater pluggable connectors that can be mated and unmated underwater with power off.
Specifications and connection methods vary across the range. Products are available for applications from shallow-water instruments to high-pressure subsea equipment, with connector selection depending on the required electrical rating, pressure rating, materials, and mating conditions.
